With the Method slat wall system, organizing and storing tattoo colors becomes much easier.
The slat walls are made of PVC and are very lightweight. With a dead weight of only 650 g per square meter, they have a load capacity of 32 kg, are easy to install, water and moisture resistant.
The shelves for tattoo bottles come in different sizes, so there are a variety of options to set up the perfect tattooing workspace.
Features:
- Color: Anthracite
- Material: PVC
- Dimensions: 32 cm x 37 cm
- Weight per plate: 650 g
- Load capacity: 32 kg
- Water repellent
- Moisture resistant
- Easy and seamless mounting
Mounting instructions:
For mounting the slat wall we recommend to use four screws to attach the Method Tattoo System to the wall. You can find the suitable mounting set in our store.
Furthermore, we recommend the following tools:
- Drill / cordless drill
- Drill (6 mm, matched to your wall texture)
- Metal drill (4 mm)
- Cordless screwdriver or Phillips screwdriver
Instructions:
1. drill four holes with a distance of 17 mm in the slat wall.
With the help of a spirit level, mark the holes of the slat wall on your wall.
3. drill holes in your wall at the marked positions and insert the dowels.
4. fasten the lamella wall with the screws provided for this purpose (only put the screws in place, do not tighten them yet!)
5. mount the side panels on the left and right side of the slat wall. In each case, with the short cover side facing the wall.
6. When the side panels are mounted, you can tighten the screws. To do this, hold the screwdriver at a slight angle.
7. now you can place and hang the shelves for the tattoo colors individually and
- DONE!