The slat walls are the base of the Method Tattoo System and the side panel finishes them off with a clean edge.
With the Method slat wall system, organizing and storing tattoo colors becomes much easier.
The slat walls are made of PVC and are very lightweight. With a dead weight of only 650 g per square meter, they have a load capacity of 32 kg, are easy to install, water and moisture resistant.
Features:
- Color: Anthracite
- Material: PVC
- Length: 32 cm
- Weight per side panel: 40 g
- Water repellent
- Moisture resistant
- Easy and seamless assembly
Mounting instructions:
To mount the slat wall, we recommend using four screws to attach the Method Tattoo system to the wall. You can find the appropriate mounting kit in our store.
Furthermore, we recommend the following tools:
- Drill / cordless drill
- Drill (6 mm, matched to your wall texture)
- Metal drill (4 mm)
- Cordless screwdriver or screwdriver
Instructions:
1. drill four holes 17 mm apart in the slat wall.
2. mark the holes of the slat wall on your wall with the help of a spirit level.
3. drill holes in your wall at the marked points and insert the dowels.
4. fasten the lamella wall with the screws provided for this purpose (only put the screws in place, do not tighten them yet!)
5. mount the side panels on the left and right side of the slat wall. In each case, with the short cover side facing the wall.
6. When the side panels are mounted, you can tighten the screws. To do this, hold the screwdriver at a slight angle.
7. now you can place and hang the shelves for the tattoo colors individually and
- DONE!