When developing new Tattoo Machines, EZ attaches great importance to design, quality and performance. The P3 Pro Tattoo Pen combines these features perfectly.
With its comfortable shape and ergonomic, textured grip, the P3 Pro sits perfectly in the hand, reducing wrist fatigue during long tattoo sessions.
The fact that the pen works very quietly is much appreciated by customers and the low vibration ensures flawless work and perfect lines.
With the ability to adjust the stroke while tattooing, the P3 Pro is the perfect all-rounder for smooth shading, rich fills and bold outlines.
To set a different stroke length, simply hold the machine by the ring in the middle and turn the upper part.
There are 6 markings on the housing to guide the stroke length:
2.0 mm, 2.4 mm, 2.8 mm, 3.3 mm, 3.7 mm, 4.2 mm
Note that the stroke length can be set anywhere between these values.
In the near future, the settings can be made with a special app via the integrated Bluetooth connectivity, which will be shown on the OLED digital display alongside the battery level in %.
If the battery is a little low, you can use it again for approx. 4.5 hours after a charging time of just 2 hours, depending on the settings and mode of operation.
Attention!
These batteries do not support fast charging/super fast charging.
We recommend using a standard charger and the supplied charging cable. Fast charging/super-fast charging can damage the battery.
Over time, every Li-ion battery wears out and the capacity slowly decreases, which leads to a reduction in working time. This is normal wear and tear over time and is not covered by the warranty.
Features:
- Color: Glossy Black
- Motor: EZ coreless motor
- Operating voltage: 5 - 12 volts DC (recommended not to exceed 10 V)
- Material: Aircraft aluminum
- Speed: 12V/10000 RPM ± 10 %
- Switching frequency: 60 - 170 Hz
- Needle protrusion: 0 - 4.5 mm
- Infinitely adjustable stroke length: 2.0 mm, 2.4 mm, 2.8 mm, 3.3 mm, 3.7 mm, 4.2 mm
- Compatible with all standard Tattoo Needle modules
- Push mode: the initial output voltage is 10 volts, lasts 1 second and then returns to normal voltage
- Bluetooth connectivity
- Built-in timer
- Auto Power Off: the machine switches off automatically after 5 minutes of non-use
- OLED screen shows voltage setting, Bluetooth connection and battery charge
- Battery capacity: 1600 mAh
- Charging time: 2 hours via USB-C charging cable
- Working time: approx. 4.5 hours (depending on settings and mode of operation)
- Manufacturer's warranty: 12 months on the motor, 6 months on the battery, 3 months on wearing parts
Machine weight and dimensions:
- Total weight (with the large handle): 247 g
- Length (without module): 135 mm
- Handle Ø: 32 - 39 mm
Scope of delivery:
- 1 x EZ - Wireless Tattoo Pen - P3 Pro with Power Pack
- 1 x Replacement power pack
- 1 x USB-C charging cable
- 1 x Manual
German
Dutch
