The Inkjecta Flite X1 can prove 8 hours of full power with a fully charged battery! Thanks to the Li-Ion battery, you no longer need annoying cables and can move freely.
Intuitive and ergonomic Smart Controls
The tension is adjusted simply by pressing the large button at the front of the underbody at an angle and tilting (right or left) the machine at the same time. The voltage range can be adjusted between 4.5 - 16.5 volts and is indicated by a ring consisting of 12 small LEDs. By turning the machine upside down and repeatedly pressing the large button, the machine is switched off.
The stitch depth of the Flite X1 is set by pressing the two arrow keys on the side of the housing.
This makes it very easy to adjust the stitch depth even with fixed grips while working. Flex-Grips are no longer absolutely necessary - but can of course be used.
The hardness can be selected with different needle bars. The pre-assembled needle bar made of carbon and the medium and hard needle bar are included in delivery.
The stroke included in the delivery is the standard stroke of 3.25 mm. Separately available are the eccentrics in 2.5; 3.0; 3.5 and 4.0 mm.
Features:
- Different Colors
- Battery powered
- Compatible with Inkjecta Flite Nano eccentric and needle bars
- Adjustment of the tension with the push of a button + inclination of the machine
- Ergonomic Smart Control
- Running time up to 8 h
- Charging time battery: 90 min
Weight and dimensions:
- Weight: 110 g without battery
- Length: 161 mm
- Height: 65 mm
Scope of delivery:
- 1x Inkjecta Flite X1
- 1x Charger with 2 connectors
- 1x Eccentric with 3,25 mm
- 1x Ergo handle
- 1x pre-mounted carbon needle bar
- 1x medium soft needle bar
- 1x hard needle bar
- 1x 2040mAH 18500 Li-ion battery
- 1x 900mAH 18350 Li-ion battery with spacer
- Inox MX5 lubricant
- SuperLube
- Magnetic tool
- Hard cover manual